• Burnaby, BC (Metro Vancouver)
  • Mon–Fri: 8am–8pm | 24/7 Emergency
24/7 Emergency Service

1(844)704-4177

close

BC Heat Pump Rebate 2026: Home Renovation and Condo & Apartment Programs

Current program rules — August 2026 update, last reviewed

This guide covers the August 2026 version of the BC heat pump rebate delivered through BC Hydro, FortisBC and CleanBC — both the Home Renovation Rebate Program for houses, townhouses and duplexes and the Condo & Apartment Rebate Program for apartments and strata units. Older pages quoting different amounts or looser sizing rules no longer match the program.

BC Heat Pump Rebate 2026: Home Renovation and Condo & Apartment Programs

The BC heat pump rebate is the main incentive for British Columbia homeowners switching from electric heat to a heat pump. How much you get depends on the building you live in and how much of your home the new system heats: up to $4,000 through the Home Renovation Rebate Program, or up to $2,250 through the Condo & Apartment Rebate Program.

Ace Tech Plumbing & Heating is a member in good standing of the Home Performance Contractor Network (HPCN) with the August 2026 Home Renovation and Condo & Apartment Rebate Program training completed. That matters, because self-installations and non-HPCN installers are not eligible for any BC heat pump rebate.

Call 1 (844) 704-4177 for a free heat pump rebate eligibility check across Metro Vancouver and the Lower Mainland.

BC heat pump rebate qualifying air source heat pump installed by Ace Tech in Metro Vancouver
A rebate-qualifying cold-climate air source heat pump. Model, AHRI number and sizing all have to line up with the program list for the BC heat pump rebate to be paid.

BC Heat Pump Rebate 2026: Quick Summary

  • Houses, townhouses, duplexes: $4,000 for whole-home heating or $1,500 for partial home heating, through the Home Renovation Rebate Program.
  • Condos and apartments: $1,000 for a ductless mini-split, or $750 per head to a maximum of three heads ($2,250) for a ductless multi-split.
  • What you must be heating with now: hard-wired electric heat such as baseboards, radiant ceilings, radiant floors or an electric forced-air furnace.
  • Who can install it: an HPCN member contractor. Self-installations and emergency replacements of broken electric systems are not eligible.
  • Condo owners must get a pre-approval code first — and strata approval before that. Installing before you have the code forfeits the rebate.
  • One rebate only: applicants may receive one rebate payment. No duplicate rebates from more than one program.

BC Heat Pump Rebate Amounts at a Glance

Program Upgrade Rebate
Home Renovation Rebate Program Whole-home heating — heat pump meets 100% of the home’s heating requirement at −5 °C $4,000
Home Renovation Rebate Program Partial home heating — heat pump meets 50% or more of the home’s heating requirement $1,500
Condo & Apartment Rebate Program Ductless mini-split heat pump $1,000
Condo & Apartment Rebate Program Ductless multi-split heat pump $750 per head, maximum three heads

Rebate amounts and terms are set by BC Hydro, FortisBC and CleanBC and can change. We confirm the current BC heat pump rebate values with you in writing before you commit to anything.

Which BC Heat Pump Rebate Applies to You?

There are several heat pump incentives running in British Columbia at once. The amount you receive and the way you apply depend on five things:

  1. Income qualification. Households that meet specific income limits may instead qualify for the CleanBC Energy Savings Program, the Energy Conservation Assistance Program or the FortisBC Income Qualified Program, which pay more.
  2. Dwelling type. A detached house follows the Home Renovation Rebate Program; an apartment or strata unit follows the Condo & Apartment Rebate Program.
  3. City of residence and electric service territory. You must be a BC Hydro or FortisBC electric residential customer, or be served by a municipal utility inside those territories such as New Westminster, Grand Forks, Penticton, Summerland or Nelson Hydro.
  4. Heating type before the installation. The BC heat pump rebate for these two programs is for homes currently heated by hard-wired electric heat.
  5. Size of the heat pump installed and how much of the home it actually heats.

Important: applicants may only receive one rebate payment. You cannot stack duplicate rebates from more than one program for the same upgrade. If your home is heated by natural gas rather than electricity, the program you want is the FortisBC dual fuel heating system rebate instead.

Home Renovation Rebate Program: BC Heat Pump Rebate Eligibility

To qualify for the heat pump rebate BC homeowners claim through the Home Renovation Rebate Program, all of the following must be true:

  • You are a FortisBC electric or BC Hydro residential customer, or served by a local municipal utility within those service territories.
  • Your current primary heating is a hard-wired electric heating system — electric baseboards, radiant ceilings, radiant floors or an electric forced-air furnace.
  • That existing system has the capacity to heat a minimum of 50% of the home to 22 °C for the entire heating season.
  • The home is 12 months or older and occupied year-round — no vacation or vacant homes.
  • You are not replacing an existing heat pump or adding a head to one. Neither is eligible for a BC heat pump rebate.

Home types that qualify

  • Single family detached dwelling, including legal individually metered secondary suites
  • Mobile home on a permanent foundation
  • Row house, townhouse or duplex

Equipment Rules That Decide Your BC Heat Pump Rebate

Product requirements are strict, and getting them wrong is the most expensive mistake in the whole process. The heat pump must:

  • Be listed on the official rebate-eligible heat pump list.
  • Have a variable-speed compressor. Single-speed and two-stage compressors are not eligible.
  • Carry an AHRI certified reference number that covers every applicable component — outdoor unit, indoor unit or units, and air handler or furnace.
  • Meet the performance ratings: HSPF (Region IV) ≥ 10 and SEER ≥ 16, or HSPF2 (Region IV) ≥ 8.5 and SEER2 ≥ 15.2.

Installation requirements

  • Installed by a Home Performance Contractor Network (HPCN) member for the applicable upgrade. Self-installations are not eligible.
  • Emergency replacement of a broken electrical system is not eligible.
  • Both indoor and outdoor units must be new, in good working order, and never previously installed in another home or building.
  • The work must meet the standards in the Heat Pump Best Practices Installation Guide for Existing Homes.

Whole-Home Heating: The $4,000 BC Heat Pump Rebate

This is the top tier of the Home Renovation Rebate Program, and it is where careful design work pays off. To earn the $4,000 BC heat pump rebate:

  • Your contractor must complete a CSA F280-12 heat load calculation using verified software at your home’s design temperature, and complete the heat load calculation summary form. An energy advisor may run the calculation, but the installing contractor has to sign off on it.
  • The heat pump must be sized to meet 100% of the home’s heating requirement, holding 22 °C indoors at an outdoor temperature of −5 °C or colder, without electric resistance heat.
  • If your local design temperature is colder than −5 °C, the heat pump plus any supplemental electric resistance heat must together hold a minimum of 22 °C at the local design condition (for example −23 °C in Kamloops).
  • The heat pump must be the primary heating system serving the majority of finished living spaces on each floor — main living room, dining room, kitchen and bedrooms.
  • The unit must be cold-climate rated per Northeast Energy Efficiency Partnerships (NEEP) and noted as such on the rebate-eligible list.
  • Minimum 12,000 BTU rated capacity at 8 °C / 47 °F.
  • Any supplemental heating must be electric — no natural gas, oil or propane backup.
  • Homes over 1,200 sq. ft. must get a multi-split or central system.

How the summary form works. You enter the BTUs required at your design temperature from the heat load calculation, and the form automatically works out the BTU requirement at −5 °C. The rated capacity of the heat pump at −5 °C comes from the qualified product list and must at minimum meet that number. For example, at a design temperature of −7 °C with a 33,000 BTU heat load, the form calculates 30,724 BTUs required at −5 °C; a 31,000 BTU heat pump meets the program requirement, but roughly 2,000 BTUs of supplemental electric heat is still needed to cover the full load at design temperature.

Partial Home Heating: The $1,500 BC Heat Pump Rebate

If the whole-home requirements cannot all be met, the partial rebate is the fallback. It pays $1,500 and the rules are lighter:

  • Cold-climate rating and a CSA F280-12 heat load calculation are recommended but not required.
  • The system must be sized to meet a minimum of 50% of the whole home’s heating requirement in BTUs per hour.
  • It must hold 22 °C indoors at −5 °C outdoors without electric resistance heat.
  • It must serve an open, finished living space such as a family room, living room or kitchen.
  • Any supplemental heat must be electric, and homes over 1,200 sq. ft. still need a multi-split or central system.

Condo & Apartment Rebate Program: BC Heat Pump Rebate for Strata Units

Apartments and strata units follow a separate track with a different BC heat pump rebate structure based on how many indoor heads you install: $1,000 for a ductless mini-split, or $750 per head to a maximum of three for a ductless multi-split.

General eligibility

  • The customer must request a pre-approval code before any work starts.
  • The home must be a unit in a purpose-built rental, strata condominium or equity co-op building older than 12 months, in a low- or high-rise apartment building, a stacked townhome building, or a multiplex with six or more units.
  • It must be a year-round primary residence.
  • The unit needs a residential account with BC Hydro or the City of New Westminster, in the name of the resident, homeowner or strata corporation. If the applicant is not the account holder, a completed utility account holder consent form is required.

Rebate eligibility requirements

  • The unit must be primarily heated by electricity before the upgrade. Gas or wood fireplaces count as secondary heating only.
  • The new heat pump must become the primary heating system, replacing the existing one, and any back-up heat must also be electric.
  • At least one indoor head must serve a main living area of the unit.
  • The existing hard-wired electric heating system must be decommissioned and disconnected — unless supplemental heat is genuinely needed to hold above 22 °C in all living spaces at the outside winter design temperature, in which case it may be retained as supplemental heat.

Product and installation requirements

  • On the rebate-eligible heat pump list, with an AHRI certified reference number covering all components.
  • HSPF (Region IV) ≥ 10 and SEER ≥ 16, or HSPF2 ≥ 8.5 and SEER2 ≥ 15.2.
  • Listed on the NEEP Cold Climate Air Source Heat Pump list.
  • Sized and installed to maintain 21 °C throughout the area served at −5 °C outdoors.
  • Installed by an HPCN member holding a GST number and a valid B.C. business licence for the trade, following manufacturer instructions, the BC Building Code, municipal and strata bylaws and permit requirements.
  • Installed in accordance with the Condo & Apartment In-Suite Heat Pump Installation Interim Guidelines.
  • Replacing an existing heat pump or adding heads to one is not eligible.

The condo application sequence

The order here is not optional, and getting it backwards is the most common reason a condo BC heat pump rebate gets declined:

  1. Customer confirms eligibility.
  2. Strata or equity co-op board approves the installation.
  3. Customer gets a quote from an HPCN contractor.
  4. Customer requests the online pre-approval code, valid for six months.
  5. The heat pump is installed.
  6. Customer returns online and completes the application within six months of receiving the pre-approval code.
  7. Rebate is paid.

Site Visits and the Issues That Sink a BC Heat Pump Rebate

Heat pump installation by Ace Tech meeting BC heat pump rebate best practice requirements
Line-set insulation, level mounting and sealed penetrations are the details inspectors check on a BC heat pump rebate site visit.

BC Hydro or FortisBC may run a site visit before your application is processed. The inspector checks that the installation followed the best practice guidelines, that the equipment meets program requirements, that it matches the invoice, that you received all required documentation, and that you were shown how to operate the system. Customers are contacted directly to book the visit, and the contractor does not need to be there.

If problems are found, the contractor is contacted with a deadline and has 30 days to remediate and supply photo proof. Anything unresolved means a declined application and a report to the Home Performance Stakeholder Council.

Most common installation issues in houses

  • Incorrect design temperature and improper sizing — the heat pump is sized to the bare −5 °C program minimum when the local design temperature needs more BTUs, and no supplemental heat is installed.
  • Outdoor unit placement and support — not levelled, not properly secured, or clearance requirements not met.
  • Refrigerant line-set deficiencies — line-sets not fully insulated. This is the single most common remediation required.

Most common issues in condos and apartments

  • Outdoor unit not level, or installed too close to a guardrail and creating a climbing hazard.
  • Required electrical and mechanical permits not obtained or not provided.
  • Line-sets not fully insulated.
  • Condensate line without proper drainage.
  • Wall penetrations not properly sealed.

How to Apply for the BC Heat Pump Rebate

For houses, townhouses and duplexes under the Home Renovation Rebate Program:

  • Apply online within six months of the invoice date.
  • Complete the application form at bchydro.com or fortisbc.com.
  • Supply copies of all required documentation, including invoices, the heat load calculation report and the heat load summary document.
  • Applications are processed within 90 days and status can be checked online.

For condos and apartments, the pre-approval code comes first and the application follows within six months of the code being issued.

Invoice and Documentation Checklist

Incomplete paperwork is the quiet killer of a BC heat pump rebate. For the Home Renovation Rebate Program, the invoice must show:

  1. Company name and address
  2. Contractor’s contact information
  3. Invoice number and contractor GST number
  4. Invoice date
  5. Customer name and address
  6. Type of heat pump installed — ducted or ductless
  7. Make and model numbers for all components
  8. AHRI number or a copy of the AHRI certification, and system tonnage
  9. Cost breakdown including materials and labour
  10. Proof of payment

For condos and apartments the invoice must also name the lead installer and state the capacity of the system in BTU, alongside make and model numbers, the AHRI number or certificate, invoice date, customer and company information including GST, the cost breakdown and proof of payment.

Why Your Contractor Decides Whether the BC Heat Pump Rebate Gets Paid

Read back through the rules and a pattern appears: almost every requirement is something the installer controls. The heat load calculation, the summary form, the model chosen off the qualified product list, the cold-climate rating, the line-set insulation, the outdoor unit mounting, the permits, the invoice fields. A homeowner cannot fix any of that after the fact.

Ace Tech Plumbing & Heating holds HPCN membership in good standing, completed the August 2026 Home Renovation and Condo & Apartment Rebate Program training, and runs CSA F280-12 heat load calculations as standard rather than rule-of-thumb sizing. We prepare the summary form, build the invoice to the program checklist, and hand you a complete application package. You can read more about our heat pump installation service or our dual fuel rebate work for gas-heated homes.

Program documents and the rebate-eligible product lists live at bchydro.com/contractors, and CleanBC details are at betterhomesbc.ca. Contractor support contacts are alliance@bchydro.com, betterhomes@gov.bc.ca and qualityinstalls@fortisbc.com.

BC Heat Pump Rebate Service Areas

We install rebate-qualifying heat pumps across Metro Vancouver and the Lower Mainland, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, Port Coquitlam, Port Moody, New Westminster, North Vancouver, West Vancouver, Delta, Langley, Maple Ridge, Pitt Meadows and White Rock. New Westminster residents are served by a municipal utility inside BC Hydro territory and remain eligible for the BC heat pump rebate.

Frequently Asked Questions

Is this the current 2026 program?

Yes. This page reflects the August 2026 version of the Home Renovation and Condo & Apartment Rebate Program for heat pumps, and it was last reviewed on October 11, 2026.

How much is the BC heat pump rebate?

Up to $4,000 for whole-home heating in a house, townhouse or duplex, $1,500 for partial home heating, $1,000 for a ductless mini-split in a condo or apartment, or $750 per head to a maximum of three heads for a ductless multi-split.

Can I get the rebate if my home is heated by natural gas?

Not through these two programs. They require hard-wired electric heat as the existing primary system. Gas-heated homes should look at the FortisBC dual fuel heating system rebate instead.

Can I replace my old heat pump and claim the rebate?

No. Replacing an existing heat pump, or adding a head to one, is explicitly not eligible under either program.

Do I need strata approval for a condo heat pump?

Yes. In a strata or equity co-op building, the board must approve the work before you request your pre-approval code, and the installation must comply with strata bylaws and permit requirements.

What happens if my home is colder than −5 °C at design?

The heat pump together with supplemental electric resistance heat must be sized to hold at least 22 °C at your local design temperature. The −5 °C figure is the program benchmark, not a substitute for your actual design condition.

Can I install the heat pump myself?

No. Self-installations are not eligible, and the work has to be done by an HPCN member contractor.

Can I combine this with another rebate?

No. Applicants may receive one rebate payment only, with no duplicate rebates from more than one program for the same upgrade.

Book a Free BC Heat Pump Rebate Eligibility Check

We will look at your current heating system, your home type, your utility account and your heat load, and tell you honestly which BC heat pump rebate you can realistically claim and what the system needs to look like to qualify.

Call 1 (844) 704-4177 or request a quote online. Ace Tech Plumbing & Heating, Burnaby BC, serving Metro Vancouver seven days a week.

Call Us Now Text Ace Tech